Vinyl Cutter Accessories

Vinyl Cutter Accessories

Choose a vinyl cutter holder or feed support

Decide whether you need to replace the tool interface, support a mat or feed compatible roll material.

Separate tool and media accessories

A blade holder belongs to the tool carriage, a roll feeder supports eligible rolled material, and a mat support serves a different job. Confirm which part your project is missing.

Check dimensions at the feed path

Confirm the supported roll or mat width and the way the accessory attaches to the cutter. Leave clearance for the media to move according to the machine instructions.

Read what the package includes

Check whether a tool holder includes a blade, whether an adapter is supplied and whether a feeder includes any trimmer or guides. Treat included parts as model-specific.

Source documentation

Guide questions

Will any roll feeder fit a similar cutter?

Check the exact supported models and attachment points in the manufacturer information.

Does a mat holder make a wider mat compatible?

Use the machine's documented mat widths. A support does not change the allowed feed width.

Is a tool adapter the same as a blade holder?

Confirm what the adapter accepts and how it seats in the carriage.

Which tool suits the job?

  1. The red Siser package replaces the holder on supported Juliet and Romeo cutters. The Viemior package supplies a housing and ten inserts for a separate listed group of Cricut machines. Match the carriage first, then check whether the existing blade can be reused.

    Siser Replacement Blade Holder for Juliet and Romeo ↗Viemior Fine-Point Blade and Housing Set, Ten Blades ↗

  2. The AOOIIN tray supports a compatible 12-by-12-inch mat and comes with two hand tools. The red Siser holder sits in the tool carriage. Choose by where the missing support belongs, at the mat feed or inside the carriage.

    AOOIIN Mat Support, Brayer and Remover Set ↗Siser Replacement Blade Holder for Juliet and Romeo ↗

  3. Both offers describe a support for a 12-inch square mat on compatible cutters. Choose the tray-only option if you already own a brayer and lifting tool. The other package includes those two hand tools.

    AOOIIN Front Support Tray for a 12 x 12 in. Cutter Mat ↗AOOIIN Mat Support, Brayer and Remover Set ↗

Tools in this guide

Shop these departments